руль на мотоцикл хурикан

Содержание

Руль HURRICANE (сталь)

2,905.59 RUB ( 4,608 иена )

Цена без скидки: 3,531.1 RUB Скидка 18%

+46 Webike кэшбэк ( 29 RUB )

Описание товара

Цвет ручки : хромированный

[очки ручки]
рукоятка : Черная сталь / Наружный диаметр φ22.2mm / Внутренний диаметр φ18mm
Кабели и шланги могут быть установлены на складе.

[размер руля]
полная высота : 95mm
габаритная ширина : 785mm
Эффективная ширина крепежной детали держателя : 135mm
объём отката : 160mm
Угол вставки : 24 градуса
угол наклона вперёд : 50 градусов

Handle Color :chrome-plated

[handle specs]
Handle:Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
Cables and hoses can be installed as stock.

[handlebar size]
Full height:95mm
Full width :785mm
Effective width of holder mounting part :135mm
Pullback size :160mm
Insertion angle :24 degrees
Forward Tilt Angle :50 degrees

Недавно просмотренные продукты

Оценки & Отзывы

Недавно опубликованные отзывы для этого товара или аналогичных продуктов

To the VINTAGE system that is covered in.

I used it for tw225.The bar in the middle is a cool handlebar.Position is just right, and this is a usable handlebar.For earthy VINTAGE.

Good Position

The width of the Handlebar at the time of purchase was too wide for me, so it was a dimension that Mirror could not install and it was a replacement.I tried about 3 kinds including junk, but none of them tried it nicely, I found this product.It seems a bit sad that the Pipe diameter will be slightly smaller than the OEM Product and move if you do not tighten Handlebar Clamp tightly.Two years have passed since installation, but rust has not appeared.

It became Retro feeling

OEM’s was Black Handlebar, so we are looking for plating type with similar shape and decided on this product by comparing price.There is no problem with tolerance at the moment, and it looks like it is also my liking.There are no points or disadvantages that have been said about this.

Slender Bridge excites a nostalgic atmosphere.Painting seems a bit weak, so daily Maintenance may be Large Off. Because the price is reasonable, I use it as a consumable item.

Since it was a form exactly good for a V.

Since it was a form exactly good for a VINTAGE Motocross, it purchased.Since there is no skid of a Handle-clamp part and it shifts into a Race, use in a Race is severe.It is an object for Street motorcycles.

Чтобы продолжить просмотр данной продукции на веб-сайте Webike для японского рынка (на японском языке), нажмите кнопку «Перейти к Webike в Японии».

Источник

Руль в сборе HURRICANE для HONDA VFR1200F

15,571.51 RUB ( 24,695 иена )

Цена без скидки: 18,664.37 RUB Скидка 17%

+247 Webike кэшбэк ( 155.74 RUB )

Описание товара

Недавно просмотренные продукты

Оценки & Отзывы

Недавно опубликованные отзывы для этого товара или аналогичных продуктов

Recommended for those who have a hard ti.

[How is it used?The OEM handlebar position on the GSX1300R HAYABUSA was too tight and my neck and wrists hurt after a long ride. Now the Touring is much easier.Was the one you received as per Image?Just like the Image. I bought the Silver color, but I was worried about the Black color until the end, but I think both are cool.Was the installation difficult?If you have all the tools, you can install it even if it takes a long time. If you have the environment that you can float only front wheel, you can do it. If you have FrontJack, it is easy.How was your experience with it?It’s really great. The position of the OEMSeparate handle was really tight, so long touring was hard, but after replacing it, my neck, shoulders, and wrists don’t hurt even after riding for a long time, so I’m really glad I went with the Pipe handle.[Included Parts:were they on?The key cylinder is made by OEM.[Was there anything that disappointed you?Nothing in particular!Other items that would be helpfulInstallation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerRead more

Anyway, Touring is a breeze!

I bought a used GPZ900R that had a STD Handlebar, so it was a STD for about two years I enjoyed the Handlebar and replaced it with a Pipe Handlebar this timeThe reason is to make Touring easier (laughs)It’s actually very easy The ride feels like another motorcycleI was stingy and made the Brake hose up to Jonto, but not through Joint Parenthesis is better for Type (Maybe.)I was worried about the angle of cut of the Handlebar, but I don’t know why, when I cut it to Right all the way to the Right, it is a little bit The Lever makes contact with the Cowl Handlebar Lock is also appliedSince the attached Handlebar is an Aluminum Handlebar, the STD I can’t use the screw type Bar End that I had on the Handlebar It should be replaced with Bar End of Universal Type

It was good to purchase.

I like the atmosphere of Separate handle of ZX12R, but if it is low Handlebar with age it makes pain to run distance and I thought about replacing Motorcycle, but if I exchange it for Pipe Handlebar Kit, Position will be easier I thought that I did not buy it.It is troublesome to remove the key box from the top bridge of NORMAL for installation, but the rest can be exchanged normally.It was regrettable that NORMAL’s Brake hose seemed to be unchangeable from the Joint place and it could not be exchanged for the extended Brake hose that was in the Set.The feeling I used was easier for Position and Handlebar operation so that I thought it was better to exchange it faster. Although I like the appearance, I think that it is a recommended product for those who have discomfort in Position.

What is the texture of Top Bridge?

Approximately four years passed since we installed Motorcycle.It was also beginning to appear that the White Breeds appeared in the place where Anodized Treatment of Top Bridge was made and purchased for replacement.

Position change is possible without brea.

Because of my age, I was concerned about the burden on my neck and shoulders, so I decided to try this item.Installation can be installed as long as vehicle maintenance, machine gangway can be installed, but decent Drill is required to remove key Cylinder. Otherwise it will take some time.Adjustment of Throttle Wire, Brake hose, Reserve tank position will become subtle depending on the Handlebar position.He turned the Throttle Wire 180 degrees and turned it downwards.If it is not set to an extreme Handlebar position, Cowl processing is unnecessary. However, making Reserve Tank Bracket movable allows you to prevent interference and interference with Meter.The Riding position is 178 cm tall and the average arm length, so I wonder if the Handlebar will come near a little. Bring it as far as possible while taking the height, and feel the running wind even using the outside Screen. It is necessary only to handle this as Bar handle, so we need to give up.It will not be the same as NAKED, but without breaking the style, there will be fewer replacement parts and processing, and improvements will be made to a pretty easy Position.

Источник

Руль HURRICANE (сталь)

1,814.1 RUB ( 2,877 иена )

Цена без скидки: 2,269.99 RUB Скидка 20%

+29 Webike кэшбэк ( 18.28 RUB )

Описание товара

Цвет ручки : хромированный

[размер руля]
полная высота : 50mm
габаритная ширина : 680mm
Эффективная ширина крепежной детали держателя : 120mm
объём отката : 145mm
Угол вставки : 47 градусов
угол наклона вперёд : 140 градусов

Handle Color :chrome-plated

[handle specs]
Handle:Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
Cables and hoses can be installed as stock.

[handlebar size]
Full height:50mm
Full width :680mm
Effective width of holder mounting part :120mm
Pullback size :145mm
Insertion angle :47 degrees
Forward Tilt Angle :140 degrees

Недавно просмотренные продукты

Оценки & Отзывы

Недавно опубликованные отзывы для этого товара или аналогичных продуктов

แฮนด์ที่ตามหามานาน

เป็นแฮนด์ที่หามานานในเมืองไทย แต่ไม่มีเลย มีโอกาสได้มาเจอในเวปนี้ สวยงามมากสำหรับแฮนด์รุ่นนี้ สั่งมาใส่แล้วจะกลับมารายงานอีกรอบครับ
This is a long hand in Thailand, but no chance to meet in this web. Very beautiful for this model. I will post back to report it offline.(translated by Google Translator)

Источник

Руль HURRICANE (сталь)

2,594.1 RUB ( 4,114 иена )

Цена без скидки: 3,152.77 RUB Скидка 18%

+41 Webike кэшбэк ( 25.85 RUB )

Описание товара

Цвет ручки : хромированный

[размер руля]
полная высота : 80mm
габаритная ширина : 645mm
Эффективная ширина крепежной детали держателя : 165mm
объём отката : 145mm
Угол вставки : 45 градусов
угол наклона вперёд : 120 градусов

Handle Color :chrome-plated

[handle specs]
Handle:Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
Cables and hoses can be installed as stock.

[handlebar size]
Full height:80mm
Full width :645mm
Effective width of holder mounting part :165mm
Pullback size :145mm
Insertion angle :45 degrees
Forward Tilt Angle :120 degrees

Недавно просмотренные продукты

Оценки & Отзывы

Недавно опубликованные отзывы для этого товара или аналогичных продуктов

The installation was no problem and I like using it without feeling any fatigue.

Источник

Руль HURRICANE (сталь)

1,617.37 RUB ( 2,565 иена )

Цена без скидки: 2,017.77 RUB Скидка 20%

+26 Webike кэшбэк ( 16.39 RUB )

Описание товара

Цвет ручки : хромированный

[размер руля]
полная высота : 80mm
габаритная ширина : 730mm
Эффективная ширина крепежной детали держателя : 130mm
объём отката : 110mm
Угол вставки : 21 градус
угол наклона вперёд : 85 градусов

Handle Color :chrome-plated

[handle specs]
Handle:Black steel / Outer diameter φ22.2mm / Inner diameter φ18mm
Cables and hoses can be installed as stock.

[handlebar size]
Full height:80mm
Full width :730mm
Effective width of holder mounting part :130mm
Pullback size :110mm
Insertion angle :21 degrees
Forward Tilt Angle :85 degrees

Недавно просмотренные продукты

Оценки & Отзывы

Недавно опубликованные отзывы для этого товара или аналогичных продуктов

w800黑色车把

这个车把比原厂的车把窄了不少，另外，原厂的那个车把真得好重，这个则要轻很多。然后这个车把他不像原厂的车把有往回弯的那样，所以整个骑行的姿势会往前稍稍前倾一些，而原来的姿势是直直的坐着，相比较而言我还是更喜欢这个姿势，腰部会更舒服一些。车把短了有一些别的问题，national cycle的这个挡风适配不如原来的车把好了。
———————————————-
The handlebar is narrower than a lot of the original handlebar, in addition, that the original handlebar really well heavy, this will have a lot of light. Then the handlebar He does not have that back the original handlebar bend, the entire riding posture will move forward slightly forward for some, but the original posture is sitting straight, comparatively speaking I prefer this position, the waist will be more comfortable. There are some other short handlebar problems, national cycle of the wind adapted better to the original handlebar good.

Хороший руль

Качественный, красивый руль. Установил его вместо оригинального. Очень удобный для меня по сравнению с оригинальным. Удобнее посадка, легче и комфортней управлять байком. Минусы немного шире оригинала, тяжелее. Очень понравился руль. Рекомендую.
Quality, beautiful steering wheel. Installed it instead of the original. Very convenient for me compared to the original. Comfortable fit, easier and more comfortable to drive a bike. Cons a little wider than the original, heavier. Loved the steering wheel. Recommend.
translated by Google Translator

Close to OEM and easy to handle

Motive for purchasingI use it on my W800In order to change the Mirror to a Bar end mirror, the OEM’s Handlebar I couldn’t do it with the Weight in it, so I bought this one!The OEM Handlebar was also good for that, so the price was reasonable, and I was able to get a good feel for it I chose something that didn’t look like it was going to happen, and here it is!Good pointsI wonder if the loss of the Handlebar Weights would be a concern for vibration and other things? I thought a little bit, but with the combination of the Grip being a seismic GelSpec I’m glad I didn’t mind!But I don’t know if there’s a little vibration in the arm that I’m holding thanks to the Grip But the Mirror on the Bar End is a little blurryThe grip sensation is not that different from OEM and it runs without any discomfortWhat I liked about itNot particularlyInstallation difficultyI guess I just used a Drill to drill a holeI carefully adjusted the position only there, but then I just had to follow the same steps to put on the one I removed It was easy!

Cost performance is good!

I’m putting it on my SRI was looking for something a little lower and wider than NORMAL and decided on theseI was a little concerned about the width, so I cut the ends by 1cm on each end and rode itI’ve been using it for a long time and I love the texture

Источник